Aluminium Chequer plate Angles and Corner Guards

75mm x 75mm x 2mm Aluminium Chequer Plate Angles

Name: 75mm x 75mm x 2mm Aluminium Chequer Plate Angles
SKU: ATPA75752MM
Availability: InStock

£8.00 – £27.38 ex VAT

Select Length:

Clear

Cut One (FREE)

Cut Two (+£0.50)

Cut Three (+£0.50)

Cut Four (+£0.50)

Cut Five (+£0.50)

Cut Six (+£0.50)

Cut Seven (+£0.50)

Cut Eight (+£0.50)

Cut Nine (+£0.50)

Cut Ten (+£0.50)

Cut Eleven (+£0.50)

Cut Twelve (+£0.50)

Cut Thirteen (+£0.50)

Cut Fourteen (+£0.50)

Cut Fifteen (+£0.50)

Cut Sixteen (+£0.50)

Cut Seventeen (+£0.50)

Cut Eighteen (+£0.50)

Cut Nineteen (+£0.50)

Cut Twenty (+£0.50)

Choose cut dimension

Cutting Tool User Guide for Bars, Tubes, Angles and other profiles

* See further down page for Sheets and Plates

Each of our Aluminium, Brass, Stainless Steel, and Plastic profiles are offered in a range of handy lengths (usually in 100mm increments) which can be selected from the dropdown menu on each product page.

What if I require more precise cut lengths?

No problem! This is where our integrated cutting tool comes in.

How do I get my item cut to a bespoke length(s)?

Choose the product you want, and select the total length of product you require
If you don’t need this product to be cut any further, then select BUY SELECTED LENGTHS – NO CUTS
If you do need this product cut into more specific lengths, then select BUY NOW – WITH CUTS; this will open the cutting tool
Input the lengths of the product you want, along with the quantity of these lengths:
For example, to begin with here we want 10x50mm lengths
Please note, the kerf is the width of the saw blade (usually 5mm). This is the width at which the blade will cut into the material, and so with each cut, this amount of product is lost from the overall length you initially chose:
For example, if 1 cut is requested, then 5mm of material is lost. If 10 cuts are requested, a total of 50mm of material is lost (this number can be found under cut waste)
You can see how much product is left to cut next to REMAINING OFFCUT
If you require any further pieces, then select ADD ANOTHER CUT and repeat the above by adding in the lengths and quantity that you need
Once you’ve selected all of your lengths and quantities, then scroll down and choose whether you would like the offcuts to be recycled by us, or if you’d like us to send them with your order
To add to your basket, select BUY NOW – WITH CUTS, at the bottom of the page
You can multiply your order on the basket page, and this will duplicate the cuts.
If your offcut is smaller than the minimum cut length we can offer (10mm), we won’t be able to send the piece

Remove BUY NOW - WITH CUTS

Our standard cutting tolerance is +/- 2mm.
Please contact us if greater precision is required.
Click here to view the Cutting Tool user guide

ORIGINAL LENGTH: --mm

Length (mm)	Cut Total	?The kerf is the width of the sawblade. This width (usually 5mm) corresponds directly with the width of the slot that the sawblade will cut into the material. This material turns to swarf and therefore is lost from the length of any remaining off cut. For example, If 1 cut is requested, 5mm of material is lost. If 10 cuts are requested, a total of 50mm of material is lost. Cut Waste
	mm	mm	X
Length and Quantity boxes must have values and the minimum length is 10mm. Please remove any empty row(s) before proceeding.
Your cut requests exceed the length of the product
REMAINING OFFCUT: --
Add Another Cut
Summary Cut Totals -- ?The kerf is the width of the sawblade. This width (usually 5mm) corresponds directly with the width of the slot that the sawblade will cut into the material. This material turns to swarf and therefore is lost from the length of any remaining off cut. For example, If 1 cut is requested, 5mm of material is lost. If 10 cuts are requested, a total of 50mm of material is lost. Cut Waste (Kerf) --

Product Cost £--

Cutting Cost £--

Total £--

Recycle offcuts Send offcuts

We accept all types of credit and debit cards.

SKU: ATPA75752MM Categories: Aluminium, Aluminium Equal Angle

Description

We can fold chequer plate to any size required – please contact us for a quote.

75mm x 75mm Aluminium Chequer Plate Angles.
Manufactured from 2mm thick Grade 5754 Aluminium Treadplate.
Excellent corrosion resistance – perfect for indoor & outdoor use as well as marine / saltwater applications.

Aluminium Chequer Plate Angles a designed to protect vulnerable edges where damage and the need for constant redecoration is an issue. Aluminium Treadplate is a very hard wearing product and can withstand the rigours of a commercial and industrial environments such as warehouses and factories. They can offer protection to walls and pillars from damage that would otherwise be cause by the accidental, but in many settings frequent, impacts from Fork Lift Trucks, Trolleys, Pallet Trucks and other mechanical handling equipment. You will often see Aluminium Chequer Plate Angles being used in big name stores such as Ikea, Costco, B&Q, ASDA as well as Airports around the world. The other common place that you might see Aluminium Chequer Plate Angles is in your local gym where Aluminium Treadplate is often the go-to solution for maintenance free wall protection.

Finally, Aluminium Chequer Plate Angles can be used as stair nosing’s where they have 2 functions. Firstly it will protect the leading edge of each step, saving on extremely expensive repairs / replacements. Secondly, the Chequer Plate design helps with grip which gives it a big thumbs up un the health and safety side too.

Additional information

Weight	N/A
Select Length:	500mm, 750mm, 1000mm, 1250mm, 1500mm, 2000mm, 2500mm

Delivery Information

Delivery from £3.95 + VAT Free delivery on orders over £85 + VAT Free cutting service