100mm x 100mm Stainless Steel Brush Polished Angle

£16.52£36.68 ex VAT

Our standard cutting tolerance is +/-2mm. Please Contact Us if greater precision is required

ORIGINAL LENGTH: --mm

Length (mm) Quantity Cut Total ?The kerf is the width of the sawblade. This width (usually 5mm) corresponds directly with the width of the slot that the sawblade will cut into the material. This material turns to swarf and therefore is lost from the length of any remaining off cut. For example, If 1 cut is requested, 5mm of material is lost. If 10 cuts are requested, a total of 50mm of material is lost. Cut Waste
mm mm X
Length and Quantity boxes must have values and the minimum length is 10mm.
Please remove any empty row(s) before proceeding.
Your cut requests exceed the length of the product

REMAINING OFFCUT: --

Add Another Cut
Summary

Cut Totals --

?The kerf is the width of the sawblade. This width (usually 5mm) corresponds directly with the width of the slot that the sawblade will cut into the material. This material turns to swarf and therefore is lost from the length of any remaining off cut. For example, If 1 cut is requested, 5mm of material is lost. If 10 cuts are requested, a total of 50mm of material is lost. Cut Waste (Kerf) --

Product Cost £--

Cutting Cost £--

Total £--

We accept all types of credit and debit cards.

Description

100mm x 100mm Stainless Steel Corner Protectors

Dull Polished on the outer faces. A dull polish is also commonly known as a Brushed Polish, due to the grain that runs along the surface being not too dissimilar to brush marks on a painted surface.

Cut and folded from top quality Grade 304 Stainless Steel, 0.9mm thick.

The outside faces of the corner protectors have a protective PVC coating on them to protect the surface finish against scratching during delivery and installation. Once installed, simply peel this coating off.

 

Additional information

Weight N/A
Dimensions N/A
Select Length:

, , ,

Delivery Information